Ambient WS07 + 1 sensor Thermo-Hygrometer with Calibration

Ambient WS-07 with included remote sensor (upgradeable to 8 sensors) 

• Simple to read, simple to use and affordable. 
• Features * Built in temperature and humidity calibration*

New Stocks

includes an indoor thermo-hygrometer in the console and can remotely read and update up to eight remote thermo-hygrometer sensors at the same from the large digit, uncluttered jumbo display.

The WS-07 includes 1X remote thermo-hygrometer and seven additional sensors can be added (F007TH) for comprehensive monitoring.

The uncluttered display console displays temperature and humidity with jumbo 33mm LCD characters which can be easily read from across the room.

The scroll mode allows you to view the indoor thermo-hygrometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.

Each remote sensor includes dip switches for channel selection and units of measure (degF or degC).

The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.

Includes minimum and maximum temperature and humidity display with easy reset option.

• Built in temperature and humidity calibration is provided for the utmost accuracy, Although calibration is optional and not required, the purpose of calibration is to fine tune or correct for any sensor error associated with the devices margin of error and inevitable sensor drift associated with electronic measurements. The measurement can be adjusted from the console to calibrate to a known source.

<<Additional sensors are available

Link to manual and troubleshooting>>WS07 meter

Features
	Indoor/Outdoor temperature & humidity
	Outdoor temperature range: lithium batteries: -40°C to 60°C
	Outdoor temperature range: non-lithium batteries: -20°C to 60°C
	Indoor/Outdoor Humidity range 10% to 99%
	Comfort level and rate of change indicators
	Scroll mode automatically displays each sensor every 5 seconds
	Dip switch selectable remote channels
	Re-sync mode if sensor reception is interrupted
	Min/Max Memory for indoor/outdoor temperature & humidity
	Monitors temperature and humidity in up to 8 remote locations
	Includes 1X remote sensor (F007TH) - transmission range of up to 90m line of sight (30m under most conditions)
	Accuracy Temp +/- 1degC  Humidity +/-5% (range 20-90%RH)
	Frequency: 433 MHz
	Update Rate: 60 seconds
	Console Dimensions (LxWxH): 12.7 x 2.5 x 11.4 cm
	LCD Dimensions (LxW): 95mm x 80mm
	LCD Segment Height: 33mm
	Power requirements:
	Main Unit - 4 x AAA (not included)
	Remote Sensor - 2 x AAA (not included)